The Equipment

Model	CHA-S634
Description	Alpine Ai-Net CD Changer

Model	CDA-7969
Description	Alpine Tuner/CD Player
Tuning Range (FM;AM)	87.7 - 107.9 MHz; 530 - 1,710 kHz
Mono Usable Sensitivity	9.3dBf (0.8uV/75 ohms)
50dB Quieting Sensitivity	13.5dBf (1.3uV/75 ohms)
Alternate Channel Selectivity	80dB
Signal-to-Noise (FM;CD)	65 dB; 95 dBA
Stereo Separation	45 dB
Capture Ratio	2.0 dB
Oversampling	8X/352.8kHz
Sampling Rate	352.8 kHz
DAC Resolution	1-Bit
Number of DACs	2
Frequency Response	5 Hz - 20 kHz (±1 dB)
Wow & Flutter (% WRMS)	Below meas. limits
Total Harmonic Distortion (THD)	0.008% (at 1 kHz)
Dynamic Range	95 dB (at 1 kHz)
Channel Separation	85 dB (at 1 kHz)
Pre Output Voltage	4 Volts
Bass Control Range	± 15 dB at 30 Hz
Treble Control Range	± 10 dB at 10 kHz
Loudness Control	± 10 dB at 100 Hz
Operating Temperature	60ºC to -10ºC
Power Requirement	11 - 16 Volts DC (- Ground)
Maximum Mounting Angle	30º Horizontal
Chassis Size (WxHxD)	7" x 2" x 6 1/8"
Nose Piece Size (WxHxD)	6 1/2" x 1 13/16" x 11/15"
Weight	3 lbs, 5 oz

Model	SYM-EPX2
Description	EPX2
Input Voltage (VRMS)	500mV-4V RMS
Output Voltage (VRMS)	5 VRMS (HP/BP/LP) 10 VRMS (AP)
Signal-to-Noise	94dB @ 1kHz ref. 1 volt
Output Impedance	50 ohms
EQ Centers (Hz)	45Hz (Bass) 15kHz (Treble)
EQ Boost/Cut	± 12dB
Crossover Frequency	Front HP = 182Hz->20k Front BP = 58Hz-7.5kHz (low side) Front BP = 182Hz->20k (high side) Rear HP = 182Hz-7.5kHz Rear BP = 58Hz-7.5k (low side) Rear BP = 182Hz->20k (high side) Low Pass = 58Hz-7.5k
Crossover Slope	12dB/octave Butterworth
Height (in/cm)	EPX2 = 2.25" (5.71cm) RDAT = 2.88" (7.31cm)
Width (in/cm)	EPX2 = 6.88" (17.47cm) RDAT = 7.00 (17.78cm)
Depth (in/cm)	EPX2 = 8.14" (20.67cm)

Model	SYM-E28
Description	E28 dCard
Input Voltage (VRMS)	N/A
Output Voltage (VRMS)	N/A
Signal-to-Noise	N/A
Output Impedance	N/A
EQ Centers (Hz)	32Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100Hz 125Hz, 160Hz, 200Hz, 250Hz, 320Hz 400Hz, 500Hz, 630Hz, 800Hz, 1.0kHz 1.25kHz, 1.6kHz, 2.0kHz, 2.5kHz, 3.25kHz 4.0kHz, 5.0kHz, 6.3kHz, 8.0kHz, 10.0kHz 12.5kHz, 16.0kHz
EQ Boost/Cut	± 12dB
Crossover Frequency	N/A
Crossover Slope	N/A
Height (in/cm)	N/A
Width (in/cm)	N/A
Depth (in/cm)	N/A

Model	RF600.4
Description	Punch 600.4
RMS Power (4 ohms)	75W x 4
RMS Power (2 ohms)	150W x42
RMS Power (Bridged/Mono)	300W x 2
THD Distortion	<0.05%
Frequency Response	20Hz-20kHz +/- 0.5dB
Signal-to-Noise	>100dB A-Weighted
Input Sensitivity	Variable from 250mV to 4V (low level) Variable from 650mV to 11V (high level)
Slew Rate	30 Volts/ ms
Input Impedance	20k ohms
Crossover Frequency	50Hz - 210Hz
Crossover Slope	12dB/octave
Height	2.4" (6.09 cm)
Width	9.9" (25.15 cm)
Length	14.4" (36.57 cm)

Extra Info
Product		Price
Wiring:	Stinger Dream Series RCA's	$140.00
	Streetwires Pwr/Gnd 4&8 Guage	$280.00
	Remote Wire	$18.00
Dash Mounting:	Scosche E46 Dash Kit	$15.00
Harness:	Scosche E46 Harness	$13.00
Antenna Adapter:	Scosche E46 Antenna Adapter	$9.00
Digital Gauges:	Stinger SVOLTG Voltage	$74.00
	Stinger STEMPG Temp	$105.00
	2 - Stinger STEMPSEN Sensors	$65.00/unit
Fuses:	1 - Stinger 5 GSE 50 Amp	$4.25/unit
Accessories:	Stinger SFPDAN Fuse Dist Block	$26.50
	4 - Stinger Probatt4 4 Gauge Term	$4.25/unit
	4 - Stinger SGT4 4 Gauge Ground Terminal	$5.25/unit
	4 - Stinger SGT8 8 Gauge Ground Terminal	$5.25/unit
	2 - Stinger SDBT 1-4 Gauge to 4-8 Gauge Distribution Block	$20.00/unit
Carpeting:	Stinger 8 yards of carpet	$32.00
Wood:	6 - 3/4" 4 x 6 Sheets of MDF	$36.00