|

Wire color Format:
wire color / stripe color
Note: You can read
the connector number by removing its sleeve, it is actually two connectors
hold by it. There are clips on the side end, All you have to do is
pull up flap and slide them out. Knowing
the polarity is only important if you plan on using existing tweeter and
midrange units.
Brown color
is always (-) or ground.
Power Connection
| pin # |
|
Wire Color |
|
Description |
| 10 |
|
White |
|
switched +12V (hot when radio on) |
| 5 |
|
Red/Green |
|
+12V (always on, main power) |
| 26 |
|
Brown |
|
ground (for amp power unit) |
Input Connection
(or head unit output)
|
pin # |
|
Wire Color |
|
Description |
| 37 |
|
Yellow/Red (+) |
|
Front left |
| 30 |
|
Brown/Orange |
|
Front left ground |
| 36 |
|
Yellow/Black (+) |
|
Rear left |
| 29 |
|
Brown/Orange |
|
Rear left ground |
| 9 |
|
Blue/Red (+) |
|
Front right |
| 17 |
|
Brown/Orange |
|
Front right ground |
| 8 |
|
Blue/Black (+) |
|
Rear right |
| 16 |
|
Brown/Orange |
|
Rear right ground |

Input and output (Amp
Harness male)
 Woofer connection
|
pin # |
|
Wire Color |
|
Location |
| 23 |
|
Blue/Red (+) |
|
Front right |
| 22 |
|
Blue/Brown (-) |
|
Front right |
| 25 |
|
Blue (+) |
|
Rear right |
| 24 |
|
Brown (-) |
|
Rear right |
| 2 |
|
Yellow (+) |
|
Rear left |
| 1 |
|
Brown (-) |
|
Rear left |
| 4 |
|
Blue/White (+) |
|
Front left |
| 3 |
|
Blue/Brown (-) |
|
Front left |
Tweeter Connection
| pin # |
|
Wire Color |
|
Location |
| 33 |
|
Yellow/Red (+) |
|
Front left |
| 34 |
|
Yellow/Brown (-) |
|
Front left |
| 31 |
|
Yellow/Black (+) |
|
Rear left |
| 32 |
|
Yellow/Brown (-) |
|
Rear left |
| 13 |
|
Yellow (+) |
|
Rear right |
| 21 |
|
Blue/Yellow (-) |
|
Rear right |
| 11 |
|
Blue/Black (+) |
|
Front right |
| 12 |
|
Blue/Brown (-) |
|
Front right |
Midrange Connection
(for HK Upgrade)
| pin # |
|
Wire Color |
|
Location |
| 41 |
|
Blue/Green (-) |
|
Front right |
| 42 |
|
Green (+) |
|
Front right |
| 39 |
|
Blue/white (-) |
|
Front left |
| 40 |
|
White (+) |
|
Front left |
|